| Output Section - Coupling Matrix |
|
| Output Section - Coupling Matrix |
|
|
|
| When the Calculate button is activated on the parameter input side, a set of graphs are calculated and displayed and the coupling matrix is updated with new coupling coefficients. If the wanted filter characteristic can not be realized with the defined topology matrix an error message is displayed and the characteristic - which is actually obtained - may be inspected by selecting the "From Coupling Matrix" button. |
| The coupling coefficients may
be displayed in 3 different formats either as: Normalized
Mij, coupling bandwidths or actual
Kij.
The display format may be selected from the "Coup Matrix" entry in the menu bar. |
|
|
|
|
|
|
| Further information about coupling matrices can be found here. |
© 2008, Guided Wave Technology - All Rights Reserved
