Output Section - Coupling Matrix


When the Calculate button is activated on the parameter input side, a set of graphs are calculated and displayed and the coupling matrix is updated with new coupling coefficients. If the wanted filter characteristic can not be realized with the defined topology matrix, the error indicator 'lights' red and the characteristic - which is actually obtained - should be inspected by selecting the "Plot Using Coupling Matrix" button.
The coupling coefficients may be displayed in 3 different formats either as: Normalized Mij, coupling bandwidths or actual Kij.

The display format may be selected from the "Coup Matrix" entry in the menu bar.

Further information about coupling matrices can be found here.

 


© 2015, Guided Wave Technology - All Rights Reserved